Concrete Lifting and Leveling Before & After Photos

A concrete driveway in Belleville, IL was settling, causing cracks to form and the slabs to separate. To solve this problem, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. NexusPro Joint Sealant was also used to seal the joints and cracks in the concrete. This will provide long-lasting flexibility and will stand up to harsh weather conditions. This will restore peace and mind for years to come!

A concrete patio was settling in Belleville, IL, causing it to crack and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety and enjoyment of the patio for years to come!

Alton, Illinois homeowner Tyler had a concrete and brick porch that the concrete was falling out of. He gave Woods Basement Systems a call about some foundation problems he was also having and found out they could help with this too. Team Woods developed a plan for him. 

Foreman Brad and his crew injected PolyLevel under the concrete slab of the porch. This raised the slab back up so it was level with the surrounding brick. 

Tyler's porch now is much safer, will drain water better, and looks better. 

Millie of Alton, Illinois had an uneven garage floor, a sunken in driveway, and moving sidewalk, so she decided to call Woods Basement Systems. Systems design specialist, Bill F. recommended installing Polylevel for the job. 

Foreman, Matthew R. installed the product. PolyLevel is a polyurethane formula, or foam that permantly lifts and stabilizes sinking concrete. How it works, is first small, dime-sized holes are drilled into the concrete. Then the polymer is injected into the void and cement covers the holes. Within 15 minutes of installation, the concrete can be used again.

Now Millie has a safe walkway. 

Some concrete steps were sinking in Alton, IL, causing gaps to form between them. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. This is a unique approach to repairing sinking concrete.  After drilling small holes into the concrete, a polymer foam is injected into the concrete slab to stabilize the surface. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. This will improve the safety of the steps and restore peace of mind for years to come!