Concrete Lifting and Leveling Before & After Photos

A concrete porch in Wentzville, Missouri started to become raised in one area, posing tripping hazards and detracting from the home's value. To fix this issue, Woods installed the PolyLevel System. This is a highly durable foam that is injected directly beneath the slab. As it cures, the foam raises the concrete back to its original position. Thanks to this install, this porch will remain level and hazard-free for many years to come.

A concrete driveway needed to be leveled in Wentzville, Missouri. Woods came out and installed the PolyLevel System to restore the slabs to their previous condition. This system consists of a highly durable foam that is injected directly beneath the concrete. As it sets, the foam lifts the concrete back up to its original position. With this installation in place, this driveway is sure to stay level for many years to come.

A driveway in Wentzville, MO, was unleveled and needed to be addressed. The homeowner decided to give Woods a call. To solve this issue, PolyLevel™ was used, This system works by drilling pea-sized holes into the concrete and injecting a polyurethane foam underneath. The foam expands, lifting the concrete slabs up to level them out. This system also hardens to become rock solid within hours. Now that their driveway is leveled, the homeowner can rest easy knowing their concrete is in great shape! 

This Labadie, Missouri home's concrete foundation slab was severely damaged and in desperate need of attention. Along with damage to the interior floors of the home, the outdoor driveway was also badly sunken and damaged. To fix it, a Woods Basement Systems team injected PolyLevel, an expanding composite foam, underneath the concrete slab. Because of the quick-drying properties of PolyLevel, the driveway was level and ready to be walked and driven on in just 30 minutes!

Linda and Dan B. own a restaurant in Troy, Missouri that had sinking concrete on their patio section. To prevent customers from tripping, they wanted to fix the problem, so they decided to call Woods Basement Systems. Systems design specialist, Chris S., recommended PolyLeveling for the job. 

Foreman, William T., installed the PolyLevel. PolyLevel works to permanently lift and stabilize sinking concrete slabs with a high density polyurethane formula. First, a small, dime-sized hole is drilled into the concrete. Then the polymer is injected into the slab and the hole is covered with additional concrete so there's no mismatched colors between slabs. 

Now, Linda and Dan B. can safely run their business.