Woods Basement Systems, Inc. Before & After Photos

Thomas B is worried about the foundation walls in his basement. The walls are cracking and leaking some water. To fix this, Scott M and his crew installed GeoLock Wall Anchors to help support the foundation. These will permanently stabilize the foundation and repair the cracks. These will also bring the foundation back to its original position, and keep it there.

A CleanSpace wall was also installed to prevent water vapor from getting in, and allowing water to drain behind the liner into WaterGuard, which was also installed to catch and drain away water to the sump system. Thomas can now rest assured knowing that the foundation won’t fail and his basement will stay dry!

A patio in O'Fallon, MO was settling, causing cracks to form and the slabs to become uneven. To solve this issue, Woods injected the PolyLevel System into the concrete. This will stabilize, lift, and level the slabs with high strength polyurethane foam. NexusPro Joint Sealant was also added to seal the joints and cracks in the concrete. This will provide long-lasting flexibility and will stand up to harsh weather conditions. This patio will now stay level and strong for years to come!

A foundation was cracking in O'Fallon, MO, so the PowerBrace and GeoLock Systems were installed. These will both stabilize the foundation, and eliminate any further inward movement. They will also reverse the effects of wall failure, and straighten the walls to their original position, and close the cracks to prevent water leakage. This foundation will remain stable for years to come thanks to these systems!

A foundation was settling in O'Fallon, MO, causing cracks to form. To solve this issue, Push Piers were installed. These will permanently stabilize the foundation, raise it back up to its original position, and keep it in place. The cracks will also be closed, and the functions of the windows and doors will be improved. This will restore peace of mind for years to come!

A concrete driveway in O'Fallon, MO was settling, causing the slabs to become uneven and sink. To solve these issues, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. NexusPro Joint Sealant was also used to seal the joints and cracks in the concrete. This will provide long-lasting flexibility and will stand up to harsh weather conditions. This will restore peace of mind for years to come!