Crawl Space Repair Before & After Photos

Karen H. of Saint Louis, MO had a very wet crawl space. High humidity in the crawl space had caused metal beams to rust and threatened to rot the wood floor joists so Karen called Woods Basement Systems. Woods recommended a crawl space encapsulation system.

Woods installed the SaniDry dehumidifier as part of that encapsulation system. The SaniDry can remove 109 pints of water from crawl space air using the same amount of electricity as smaller household units. It keeps relative humidity low to prevent rot and rust as well as make conditions inhospitable for mold growth and pests.

This Creve Coeur homeowner's crawlspace was damp, dirty, and open to outside air, making the situation worse. If left untreated it could become a breeding ground for critters and mold, or worse, cause the floor above to fail. Because of the inconsistent temperature in the crawlspace, it makes regulating the temperature of the entire house extremely difficult. On top of that, the old insulation was failing all together. To remedy these issues, the CleanSpace encapsulation system was used, to create an airtight and moisture-free crawlspace, keeping water and outside air out. They also installed the SilverGlow insulation system to regulate the temperature better than the previously failing insulation. This will keep the home better insulated and free of mold, critters, and moisture for years to come.

A crawlspace in Saint Louis, MO was leaking water when it rained, so Woods installed a SmartSump system to pump this water out. A CleanSpace liner was also installed to isolate the crawlspace from the earth and to prevent moisture, dirt, and debris from entering. This crawlspace will remain clean and dry for years to come!

A crawlspace in Saint Louis, MO, was humid and needed to be addressed before concerns of mold appear. The homeowner decided to give Woods a call. To solve this issue, CleanSpace™ was used. This durable liner will not only make the crawlspace look nicer, it will also keep the humidity and other outside elements out of the crawlspace. With this system in place, the homeowner can rest easy knowing their crawlspace will remain dry for years to come! 

Sharon S., St. Louis, Missouri homeowner, was troubled by her musty, moldy crawlspace. The mold was an allergen and caused her home's air to be unhealthy. System design specialist Adam R. designed a solution to keep her crawlspace dry.

CleanSpace was installed by foreman James L. CleanSpace is an inorganic vapor barrier that keeps water out of the crawlspace. Because it is inorganic, it does not support mold growth. Sharon is thrilled to have a dry crawlspace and a healthy home.