Crawl Space Repair Before & After Photos

Moisture was entering a crawlspace in Saint Louis, MO, creating a damp environment and allowing mold to grow. To solve this issue, the CleanSpace Encapsulation System was installed. This will isolate the crawlspace from the ground. It also controls water, humidity, outside air infiltration, and heat loss. The white finish will brighten the crawlspace and make it easier to see inside. This crawlspace will now remain dry and restore peace of mind for years to come!

A crawlspace in Saint Louis, Missouri, needed to be sealed. Humidity and cool air were starting to leak upwards into the home. To address this issue, Woods came out and installed the CleanSpace System. This system consists of a highly durable sheet of material that is placed directly on the walls and ground of the crawlspace. Not only does this help with the humidity, but this seal will also protect the crawlspace from rot, insects, and the outside elements. Not only that, but CleanSpace also brightens up the crawlspace, reflecting any available light back inward. With this installation in place, this crawlspace with be sealed for decades to come!

Sharon S., St. Louis, Missouri homeowner, was troubled by her musty, moldy crawlspace. The mold was an allergen and caused her home's air to be unhealthy. System design specialist Adam R. designed a solution to keep her crawlspace dry.

CleanSpace was installed by foreman James L. CleanSpace is an inorganic vapor barrier that keeps water out of the crawlspace. Because it is inorganic, it does not support mold growth. Sharon is thrilled to have a dry crawlspace and a healthy home.

A crawlspace in Saint Louis, MO was leaking water when it rained, so Woods installed a SmartSump system to pump this water out. A CleanSpace liner was also installed to isolate the crawlspace from the earth and to prevent moisture, dirt, and debris from entering. This crawlspace will remain clean and dry for years to come!

This Creve Coeur homeowner's crawlspace was damp, dirty, and open to outside air, making the situation worse. If left untreated it could become a breeding ground for critters and mold, or worse, cause the floor above to fail. Because of the inconsistent temperature in the crawlspace, it makes regulating the temperature of the entire house extremely difficult. On top of that, the old insulation was failing all together. To remedy these issues, the CleanSpace encapsulation system was used, to create an airtight and moisture-free crawlspace, keeping water and outside air out. They also installed the SilverGlow insulation system to regulate the temperature better than the previously failing insulation. This will keep the home better insulated and free of mold, critters, and moisture for years to come.