Concrete Lifting and Leveling Before & After Photos

Cindy W was concerned when she noticed that the walkway outside of her home was uneven. So, she decided to call Woods Basement Systems. System Design Specialist Jeremy K was able to come up with a solution to the problem.

Foreman William T used PolyLevel to even out the concrete on Cindy’s sidewalk. PolyLevel is injected into the sinking portion of the concrete and will raise the level of concrete that is sinking. The injection leaves behind a dime sized hole that will be filled in with concrete. 

A concrete slab was sinking in Hillsboro, MO, so the PolyLevel System was installed. This will stabilize, lift, and level the slab with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. This will restore peace of mind for years to come!

This homeowner's porch in Hillsboro, MO, was settling, causing cracks between the concrete and the house, as well as making the pillar unstable. To solve this, the PolyLevel system was injected into the concrete through pea-sized holes, which will fill in the gaps under the concrete and level it out. This closes cracks over time, and the NexusPro system was also used to fill larger gaps to prevent further cracking. Now this porch will stay level for years to come!

A concrete driveway was shifting in Cedar Hill, MO, causing the slabs to sink and become uneven. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slabs back up. This will make the driveway safer and restore peace of mind for years to come!

Lori T. of Lake Saint Louis, MO had a concrete driveway and walkway that was very uneven. The concrete slabs of the driveway and walkway had sunken over the years and created numbers cracks and tripping hazards. As seen in the picture, there was a gap about three and a half inches between the driveway and garage which made it difficult to pull in the car so she called Woods Basement Systems. Woods recommended PolyLevel.

PolyLevel is an expanding polymer foam that was injected under the concrete slabs of the driveway and walkway. It lifts and levels the concrete, as can be seen in the picture, and cures quickly: it can be driven on and used in about 15 minutes which is much less downtime than traditional mudjacking.