Concrete Lifting and Leveling Before & After Photos

A sidewalk in Saint Louis, MO, was sinking, causing tripping hazards and distress for the homeowner. To solve this issue, PolyLevel™ was used. This polyurethane foam is injected underneath the concrete slabs through pea-sized holes and expands as it dries, becoming rock solid. This lifts the concrete slabs, making them level once again. Next, NexusPro™ was used to fill in the gaps. This flexible sealant will stand up against the harsh weather conditions and make the concrete look nicer. With these systems in place, the homeowner can rest assured that their sidewalk will remain in good shape for years to come! 

A sidewalk in Saint Louis, MO, was unleveled and had large gaps in between the concrete slabs. This needed to be addressed, so the homeowner decided to give Woods a call. To solve this issue, PolyLevel™ was used. This system works by drilling pea-sized holes into the concrete and injecting a polyurethane foam underneath. The foam then expands, lifting and leveling the concrete. Next, NexusPro™ was used to fill in the gaps. This flexible sealant with withstand any harsh weather the homeowner may receive. With these systems in place, the homeowner can rest easy knowing their concrete is in great shape. 

Marsha B. of Affton, Missouri noticed that her garage and patio were sinking and cracking due to concrete settlement. She did not want this problem to become a tripping hazard, so she called Woods Basement Systems for a solution.

Design specialist Chris T. assessed the situation and decided that PolyLevel would fix the problem. Foreman William T. then traveled to the home to get the project started. PolyLevel is inserted below the concrete through a penny-sized hole. The foam material expands and pushes the concrete back to its original position. 

Marsha B. no longer has to worry about her concrete patio or garage sinking and cracking. She now has a level patio and garage.

Frank of Affton, Missouri had uneven concrete slabs on his front sidewalk which can be a tripping hazard, so he called Woods Basement Systems for a solution. Systems design specialist, Peter N. recommended PolyLevel for the job.

Foreman, Andrew T. installed the PolyLevel. PolyLevel is a high density polyurethane formula which is used to permanently lift and stabilize sinking concrete slabs. Small, dime-sized holes are drilled into the concrete and then the polymer is injected into the void. The holes are covered with cement and within 15 minutes to concrete can be used again so there is no long wait for it to settle. 

Now Frank M. can safely use his sidewalk. 

A sidewalk in St. Louis, MO was settling, causing a large crack to form. Woods repaired this concrete by first injecting PolyLevel into the slabs, bringing them back up to their original position. NexusPro was also added to seal up the crack, so it doesn't grow. This concrete will stay stable and even for years to come!