Woods Basement Systems, Inc. Before & After Photos

A homeowner in Effingham, IL wanted to encapsulate the crawlspace, so a CleanSpace Liner was installed. This crawlspace encapsulation system completely isolates the crawlspace from the earth. This dramatically reduces the humidity level in the air, which will eliminate mold growth and rot from the crawlspace and make the whole house healthier. The bright white finished side will brighten the crawlspace and allows one to easily see that the crawlspace is free of mold, insects, and dirt. This crawlspace will remain clean and dry for years to come!

Water was entering a basement in Effingham, IL, and the sump system was not pumping this water out as it should. To solve this issue, the WaterGuard System was first installed. These drainage pipes intercept water at the perimeter of the basement and drain it toward the TripleSafe Sump Pump System, which will drain water from WaterGuard and below the basement and discharge it out of the house. This system also includes an UltraSump battery backup system, which turns on if the power goes out and effectively pumps out the water. This basement will remain dry and clean for years to come!

Water was damaging a basement wall in Effingham, IL, so the homeowner wanted to get the lower half of the walls refinished. To do this, the EverLast Finished Wall Restoration System was installed. This will restore the bottom half of the partially finished wall, and prevent mold from appearing. This basement wall will look new and clean for years to come! 

Moisture was entering a crawlspace in Effingham, IL, creating a damp and musty environment. To solve this issue, the CleanSpace Encapsulation System was installed. This will completely isolate the crawlspace from the earth, dramatically reducing the humidity level. This will also eliminate mold growth and make the whole house healthier. The white finished side will brighten the crawlspace and allow one to see inside easily. 

A sidewalk was sinking next to a pool in Effingham, IL, causing it to become unlevel. To solve this issue, the PolyLevel System was installed. This will stabilize, lift, and level the concrete slabs with high-strength polyurethane foam. Pea-sized holes were drilled into the concrete and the foam was injected to fill the void underneath. This installation technique allows the foam to expand as it cures, precisely lifting the slab back up. Additionally, NexusPro Joint Sealant was installed. This will seal the joints and cracks in the concrete. It will provide long-lasting flexibility and stand up to harsh weather conditions. These systems will improve the safety of the concrete and restore peace of mind for years to come!