Woods Basement Systems, Inc. Before & After Photos

Moisture was entering a crawlspace in Vienna, IL, causing mold to grow. To solve this issue, the CleanSpace Encapsulation System was installed. This will completely isolate the crawlspace from the earth, dramatically reducing the humidity level. This will also eliminate mold growth and make the whole house healthier. The white finished side will brighten the crawlspace and will allow one to easily see inside. This crawlspace will stay dry and restore peace of mind for years to come!

Support blocks were falling apart in a Vienna, IL crawlspace, causing the floor joists to fall. To solve this issue, the SmartJack System was installed. This will stabilize the beams and floor joists in the crawlspace and lift the floor above it back toward its original elevation. Floor bounce caused by weakened joists or excessive spans will also be reduced. This crawlspace will now remain supported and stable for years to come!

Diagonal wall cracks are a sign of inward movement of the basement wall.  Damage to the finished interior wall is another sign of a problem.  We stabilized and stopped this inward bowing by installing Foundation SupportWorks® Goe-Lock™ wall anchors.  This system includes an interior wall plate attached to an exterior double wall anchor plate via a "hot dipped" galvanized rod.  Pinning the wall back by anchoring it to dense stable soils more than 9 feet away from the bowing wall is an efficient and effective way to solve bowing walls.

Customer, Joe of Elkville, Illinois had sagging floors. He already had two floor jacks set up, but they were not doing the job. So he decided to call Woods Basement Systems for help. Systems design specialist Jacob K. was able to find a solution by recommending the installation of six SmartJacks.

Foreman, Joshua B. installed the jacks. SmartJacks are used to lift and stabilize existing beams and floor joists. 

Now, Joe K. can enjoy his home without any worries. 

A crawlspace in New Douglas, Illinois, needed some stabilizing as the floor joists above were starting to show signs of failure. To resolve this issue, Woods came in and installed the SmartJack System. This system consists of custom cut steel beams. They are placed in galvanized fill to equally distribute the weight of the building. They can be tightened over time. This allows maintenance to be done as the ground continues to shift without requiring another costly install. Thanks to the addition of these steel supports, this crawlspace will remain stable for decades to come.