Foundation Repair Photo Album: Stabilizing A Home In Union, MO
A home in Union, Missouri, had some major foundation issues that needed to be addressed. Cracks had been starting to appear on the inside and exterior walls of the home, indicating a severely shifting foundation. If this was not corrected, it would only continue to get worse. Woods came out and installed several products to re-stabilize the home's foundation. The first installation was the PowerBrace System. This system consists of zinc-plated steel beams custom fit to the basement height. They are secured to the wall and floor, and are anchored to the support beams that hold up the floor. This system can be tightened over time, allowing for adjustments to prevent wall failure. The next installation was in the crawlspace, called the SmartJack System. This system consists of custom cut steel beams. They are placed in galvanized fill to equally distribute the weight of the building. They can be tightened over time which allows maintenance to be done as the ground continues to shift without requiring another costly install. With these two installs in place, the home will be stable many years into the future.
Exterior Crack
This crack is indicative of a moving foundation.
Interior Cracks
These interior cracks will only continue to get worse.
Bowing Wall
The bowing wall you see here has been a source of major concern for the homeowners.
Wall Crack
The interior cracks are cause for concern as well.
Old Supports
These old supports are no longer doing what they were installed to do and need to be replaced.
New Piers
With this new pier install, this home is on its way to being completely stable once again.
Crawlspace Pier Install
These PushPiers in the Crawlspace will stabilize the home directly from its foundation.
Wall Piers
With this final pier install, the home is fully stabilized and the space is ready to be utilized worry-free.