Crawlspace Encapsulation in De Soto, MO

Tuesday, October 17th, 2017 by Jordan Link

Challenge

Michael J. of De Soto, Missouri, had a crawlspace that collected moisture. Water could be seen dripping from the duct-work. He called Woods Basement Systems, where Systems Design Specialist Terran "TJ" Jones came out to design a solution based on Michael's needs. He needed a solution that would provide a barrier against moisture, to keep his crawlspace more dry than before.

Solution

The best solution for Michael was to install the CleanSpace® vapor barrier around the perimeter of the crawlspace and the floor, to install a drainage matting on the floor, and install a vent cover to keep out as much of the humid air as possible.

Foreman Joshua Bailey and his team came out to install the products. The project began with installing the vent cover over the existing vent-hole, which would control the humid air coming through. The team then laid down a dimpled drainage matting over the floor of the crawlspace, which would help control the moisture from the dirt floor. Over the top, the CleanSpace® vapor barrier was installed. This barrier was laid seamlessly throughout the crawlspace, and then mechanically fastened to the walls to ensure stability.

Now, Michael has a drier, less humid crawlspace, which could now benefit the air condition in his home.

Project Summary

Systems Design Specialist: Terran "TJ" Jones

Primary Foreman: Joshua Bailey

This crawlspace was not leaking, but was constantly wet, due to the constant accumulation of moisture. The crawlspace floor was consistently damp, as seen by the dark areas of the floor.

More visibly, the duct-work collected moisture, which would evaporate and condense over and over again. These conditions provide ample conditions for mold growth.

Perhaps the best example of condensation, this duct had water dripping from it.

The crawlspace has been encapsulated. Here, it is seen that the vapor barrier seamlessly covers every inch of the floor and walls.

The CleanSpace® vapor barrier can be installed around virtually any object, including pipes. The barrier is secured around the barriers to restrict the flow of air.

The CleanSpace® vapor barrier is durable, which means work can be done over it and walked on without fear of ripping.

One of the major sources of humid air was from outside. Applying these vent covers would help restrict the air flow into the crawlspace, already improving the air quality.

Multiple vent covers were installed, which were screwed into the concrete for anchoring.

About the author

Jordan Link

Jordan Link lives in the St. Louis Metro-East area and serves as a Marketing Specialist for an industry-leading home improvement contractor and as a Sales Trainer for a multi-national retail corporation. Jordan provides quality email marketing campaigns and web content that transcend the competition, inspire clients, and develop new business.

Back to Previous Page Back to Case Studies

Crawlspace Encapsulation in De Soto, MO

Challenge

Solution

Project Summary

About the author

our service area

We serve the following areas