Uneven Slab Before Installation
Here you can see how there is a big difference in height between slabs, creating a tripping hazard.
Before Installation
Here you can see that the joints are not sealed, allowing water to infiltrate them, leading to problems over time.
PolyLevel Injected
PolyLevel is injected underneath the concrete slab through small holes that are drilled into the concrete by the installer. It lifts the slab up to the correct height, making the area level and safer to walk on.
Covered Up
After injection, PolyLevel takes approximately 15 minutes to cure and be back to use. Once it is cured, the holes are filled back in with concrete so they can blend better with the rest of the slab.
Attractive Look
NexusPro can withstand sunlight, and will not bubble, yellow, or crack. This keeps it looking great and effective.
Fast-Curing
Just like PolyLevel, NexusPro also has a relatively-fast curing time. PolyLevel cures in about 15 minutes, and NexusPro cures in nearly an hour.
Stop Water Infiltration
After PolyLevel is installed, NexusPro can be used to seal the joints, preventing water infiltration and washout of the soil underneath.
Leveled and Sealed
The slabs are now the same height and sealed, making the area look more attractive, be safer to walk on, and will last for many years to come!
Weather-Resistant
NexusPro can withstand almost all weather conditions, including rain, snow, and temperature fluctuation.