Basement Waterproofing Photo Album: Protecting a Basement from Leaks
This basement in Godfrey, IL. was unprotected from leaks that occur where the wall meets the floor. Leaks often occur there as water builds up beneath the floor. The water level rises until it can leak into the basement through the tiny gap between the wall and the floor.
The best way to prevent these leaks is to redirect that water before it can rise into the basement. To do this, foreman Mike B. installed WaterGuard™ just below the floor along the wall. WaterGuard™ is a perimeter drainage system that sits on top of the footing, beneath the floor, and drains water from below the house into the sump pump system before it can rise into the basement. Because WaterGuard™ sits on top of the footing it won't get clogged by the mud and won't require filter fabrics that will eventually need replacing.
WaterGuard™ drains into the TripleSafe™ sump pump system. This system features three pumps that can work individually or together to pump water out of the home even during power outages. The TripleSafe™ sump pump expells water outside through the IceGuard™ attachment and to the outlet of the discharge line. The IceGuard™ attachment is added to the outside discharge line to allow water to flow out from the sump pump even when the outlet is blocked by ice or debris. The simple system will allow water to pour out from the IceGuard™ attachment only when the other end is blocked. This will keep the water flowing out from the sump pit, rather than building up and flooding.
As a final waterproofing measure, the discharge line and downspouts from the gutters are extended so that they pour water away from the home. This will help keep water from building up around the foundation of the home which will help prevent leaks. Now this home in Godfrey, IL. is protected from leaking basements thanks to the WaterGuard™ and TripleSafe™ systems inside and the IceGuard™ and extended downspouts outside.
WaterGuard™ Along the Wall
WaterGuard™ features an extension that reaches slightly up the wall. This extension will allow any water that leaks in through the wall to drain into the WaterGuard™ system and get carried to the sump pump.
WaterGuard™ Behind Finished Wall
The bottom of this finished wall is removed to install WaterGuard™. Once it is installed, the finished wall is replaced. WaterGuard™ will prevent water from rising into the basement from below and can collect water leaks from the foundation wall before they can puddle up at the base of the finished wall.
TripleSafe™ Sump Pump System
The TripleSafe™ will pump all the water that gets collected by the WaterGuard™ system out of the home, keeping the basement dry and protected.
Extended Downspout
This raingutter drains into an extended downspout. By extending the downspout, the water caught by the gutter will be drained away from the home so that it can't build up against the foundation walls.
IceGuard™ Attached to the Discharge Line
These white cones are the IceGuard™ attachment. They will prevent the basement from flooding due to blocked discharge lines.